4
Installation
Materials Needed
•
1
⁄
8
" Allen wrench
•
5
⁄
16
" socket
• Phillips screwdriver
• Putty knife
• Carpenter’s level
•
1
⁄
4
" O.D. copper tubing for water supply
•
5
⁄
8
" I.D. plastic tubing and hose clamp
(for gravity drain)
Select Location
The ice maker was designed to be installed under the
counter. Its proper location will ensure peak
performance. Choose a location indoors, away from
heat and out of direct sunlight. Best performance will
be maintained when installed within the following
parameters:
Ideal Ambient
Temperature Range
Built-In..........................................................55-80° F
NOTE:
Ice maker will not perform correctly in ambient
temperatures less than 55° F.
Cabinet Clearance
The ice maker may be enclosed on the sides, rear and
top. The front should be open and clear of any
obstructions.
Do not obstruct air flow through the lower front
grille area.
NOTE: Install the ice maker so that it can be
moved forward if service is
ever required.
Do this by
adding enough copper tubing to
create a service loop.
Use care to avoid kinks in tubing
when creating the service loop.
Dimensions
Service
Loop
34
1
⁄
4
"
25
5
⁄
8
"
24
3
⁄
4
"
23
1
⁄
2
"
21
1
⁄
8
"
1
1
⁄
4
"
Supplied
Water Line
Fitting
14
3
⁄
4
"
41007621 JA Ice Maker ENG 4/28/03 2:18 PM Page 4
