background image

7

4. 

Start the hold-down screws into the hold-down brackets.

5. 

Center the cooktop in the opening and, using a wood block 

between the screw and the countertop, moderately tighten 

the screws to secure cooktop.

IMPORTANT:

 Do not tighten screws directly against the 

countertop.

Make Electrical Connection

This cooktop is manufactured with a frame-connected green or 

bare ground wire. Connect the cooktop cable to the junction box 

through the UL Listed or CSA Approved conduit connector.

Electrical Connection Options

If Your Home Has: And You Will Be 

Connecting to:

Go to Section:

4-wire direct

A fused disconnect 

or circuit breaker 

box

4-Wire Cable 

from Home Power 

Supply

(12.7 cm)

5"

3-wire direct

A fused disconnect 

or circuit breaker 

box

3-Wire Cable 

from Home Power 

Supply - U.S.A. 

Only

(8.9 cm)

3

¹⁄₂

"

4-Wire Cable from Home Power Supply

IMPORTANT:

 Use the 4-wire cable from home power supply in 

the U.S.A. where local codes do not allow grounding through 

neutral, New Branch circuit installations (1996 NEC), mobile 

homes and recreational vehicles, New constructions, and in 

Canada.

1. 

Disconnect power.

2. 

Remove junction box cover, if present.

3. 

Connect the 2 red wires (B) together using a UL listed wire 

connector.

4. 

Connect the green (or bare) ground wire (C) from the cooktop 

cable to the green (or bare) ground wire (in the junction box) 

using the UL listed wire connectors.

5. 

Put a UL listed wire connector on the end of the white 

wire (F).

NOTE: 

Do not connect the green (or bare) ground wire to the 

neutral (white) wire in the junction box.

6. 

Connect the 2 black wire (H) together using a UL listed wire 

connector.

7. 

Reinstall junction box cover.

A

B

C

E

D

A. Countertop
B.  Wood block
C.  Hold-down screw
D.  Hold-down bracket
E.  Burner box

WARNING

Electrical Shock Hazard

Disconnect power before servicing.
Use 8 gauge copper wire.
Electrically ground cooktop.
Failure to follow these instructions can result in death, 

fire, or electrical shock.

H

G

E

I

A

D

B

C

F

A.  Cable from home power supply 
B.  Red wires
C.  Green (or bare) ground wires
D.  3-wire cable from cooktop
E.  Junction box

F.  White wire (from home power 

supply)

G. UL listed wire connector
H.  Black wires
I.   UL listed or CSA approved 

conduit connector with wire 

bushing

Summary of Contents for JIC4724HB

















Reviews: