Jenn-Air 720-0709, Installation Instructions Manual

Page: 15 / 108

15
2. Remove the access cover at the back of the grill by removing
the 4 screws at the back of firebox (2 on each side of the
rotisserie infrared burner).
3. Using a Phillips screwdriver, remove the 2 screws holding the
spider guard to the burner.
4. Use 24 mm wrench to remove the orifice nut.
5. Take out the orifice support, and then use a 6 mm socket and
wrench or 6 mm nut driver to remove the LP orifice at the end
of the supply pipe. Replace with Natural gas orifice.
6. Reinstall the spider guard, access cover, and wind baffle.
Change the Sear Burner Orifices
1. Remove the 2 screws securing the igniter and remove the
igniter from the side burner.
2. Remove the searing side burner screws. Set the screws and
cover aside.
3. Lift the searing side burner out of the grill.
A. Access cover
A. 2 screws
A. Orifice nut
A
A
A
A. Orifice support
B. Orifice
A
B