3
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
ROTISSERIE ASSEMBLY
Estimated Assembly Time: Approximately 10 minutes
Required Tools: Phillips Screwdriver (not included)
1. Align the holes in the motor bracket (B) to the pre-drilled holes on
the left side of the grill. Attach the motor bracket using two 2.75-in.
bolts (C) provided as shown in Fig. 1.
2. Slide rotisserie motor (A) over motor bracket (B) as shown in Fig.
2.
3. Place the rotisserie forks (E) onto the spit rod (D) as shown in Fig.
3.
Note
: Use caution when handling the sharp rotisserie forks.
4. Place the spit rod (D) into the motor (A), making sure the rod
aligns with the motor correctly as shown in Fig. 4.
Slide the collar shaft (H) onto the opposite end of the spit rod and
place into the slot on the right side of the grill. The thumbscrew for
the shaft should be inside the grill firebox.
5. Screw one washer (G) onto the treaded end of the spit rod (D);
put on the counterbalance (F) and tighten in place using second
washer as shown in Fig. 5.
6. Completed Assembly as shown in Fig. 6.
