2
GENERAL INTRODUCTION
Thank you for selecting the 3011M meter. The 3011M is a precision
tool that measure Conductivity, Salinity, TDS and temperature. A
built-in microprocessor stores, calculates and compensates for all
parameters related to Conductivity.
This unit has a waterproof IP67 case. The touch mode keys are
highly reliable with tactile and audio feedback. This meter can
operate with one 9 V battery. Re-calibration is not required when
power is turned on again.
The front of the meter has a large LCD that displays Conductivity,
TDS, Salinity and temperature simultaneously along with user
prompts and mode indicators. The unit prompts the user through
calibration and measurement procedures.
The unit is also equipped with a non-volatile memory allowing the
user to store 50 different sets of readings. This unit will assign a site
number for each set of reading so the user can review the data
easily.
The model 3011M comes with a conductivity probe. Other features
include 1 point calibration for Conductivity, automatic temperature
compensation. This meter is user-friendly for field, industrial and
laboratory applications.
INITIAL INSPECTION
Carefully unpack the unit and accessories. Inspect for damages
made in shipment. If any damage is found, notify your
Jenco
representative immediately. All packing materials should be saved
until satisfactory operation is confirmed.
