handles). Use a wooded rod with a hook in the end to open the kiln a little to take a peek or to
help close the lid after venting.
The Bonnie Glo Plus
is top loading and also a clam shell design so that pieces can be assembled
on the floor of the kiln. Open the lid of the kiln and use a pencil to mark a circle on the floor of
the kiln to indicate the 15” diameter, so that when the kiln is open clam style there is an indication
of the area to stay within. Apply kiln wash let dry and then add the shelf paper. There are two
other clamps: one holds the top lid closed when the kiln opens clam style, and one holds the
heating section to the floor of the kiln. Use these clamps appropriately so there is not a mishap
while opening the kiln.
This Tilt Model has a stand with a clamp attached to it where the kiln connects to the stand to
ensure that the kiln does not tip backwards.
Important
: This dual opening kiln has to be clamped
to the stand before use.
Open from bottom Open from Top Stand Corner Tilt Model Stand Stand Clamped to Kiln
