Page 11
4. System composition of SI-300R, 600R
CLS (Custom Logical Safe)-Control System
The CLS-Control system (Patent no.0328729) is our enhanced
safety controller developed by our engineers. Designed to allow
our equipment to be operated in environments that require
perfect
thermal
safety-including
areas
where
flammable
chemicals are used.
In most cases with other brands of lab equipment, the CPU comprises both control and
safety features together. In the event of the CPU failing, the logic controlling the safety
features will often be compromised.
Jeio Tech has separated these two important elements and now has an independent
safety system running alongside the performance controller.
When any risk factors are sensed (ex: voltage peaks, short circuit, over temperature
etc.) the machine will go into a recoverable safety mode as follows.
The power supply to individual components is isolated by a magnetic switch,
leaving only the earth in circuit.
Details of the fault are displayed (indicator codes)
Audio and visual alarms are set off to alert the user and remain on until attended.
Shaking System
■ Stop the one regular position
The automatic system with Brake function allows the shakers can always stop at
the same position.
■ Turn Right and Left both ways
Our original Auto Reverse function allows it turns right and left both ways, in
addition to control the each turning time period by setting with the timer.
■ Speed recovery
The motor often check the set rpm and memorize the speed value. If there is
any outside interruption, it can recover the set speed.
■ Auto-control
To control speed and stop the one regular position accurately, it can memorize
the settle parameter value automatically.
■ Wide working range
From minimum 10 rpm to maximum 300 rpm, it works very stably.
■ Prompt acceleration and deceleration
It can accelerate/ decelerate promptly with the speed recovery function and the
brake function at once minimizing Over shoot/ Under shoot.
Summary of Contents for Lab companion SI-300
Page 67: ...Page 66...
Page 68: ...Page 67...
