manualshive.com logo in svg

Jeio tech ISF-7100, Operating Manual, Page: 64 / 65

Share
Download
Jeio tech ISF-7100 Operating Manual Download Page 64

 

５８ 

 

9.5.2 Warranty exception 

Customer can’t get free warranty service in case of as below. 

 

•

 

If the product is broken due to 

the user’s fault. 

•

 

If the product is broken due to improper operation or storage. 

•

 

If the product is broken due to improper modify or repairing. 

•

 

If the product is broken due to overuse of voltage or earthshock. 

•

 

If the product is broken without taking care of 

the “Notice” alerted     

on the manual. 

 

9.5.3 Service and technical advice 

We, Jeiotech Co., Ltd. are doing best to give best support based on customer service system. 

When  we  get  the  symptoms,  fault  states,  contact  number  by  customer,  we  offer  after  sales 

service. 

 

International Sales Head Office (Korea)   
#1005, Byucksan Digital Valley 6-Cha, 481-4 Gasan-Dong, Geumcheon-Gu, Seoul 153-704,   
Korea 
Tel: +82 2 2627 3816     
  E-mail: 

[email protected]

 

 

Summary of Contents for ISF-7100


































































Reviews:

No comments