BM-21S
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
10
3.2. Adapting for 150
–
300 mm pipes
To bevel pipes with diameters of 150
–
300 mm (6
–
12’’), use the standard guide set
after
assembling
it
in
a
different
way.
To
do
this,
use
the 6 mm hex wrench to unscrew
two side screws (
1
, Fig. 6), then remove the guide set (
2
), rotate it by 180° around
the vertical axis (
3
), mount again (
4
), and secure with the screws (
1
).
Fig. 6.
Rotating and mounting the guide set
Lock the turn of the T-nut with the 12 mm flat wrench and use the 8 mm hex
wrench to unscrew the roller screw. Next, move the rollers from the opening
(Fig. 7a)
to
the
slot by mounting
them
as shown in Fig. 7b, placing the T-nut into the slot.
1
2
4
3
1
