BM-21S
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
13
3.3. Adapting for 300
–
600 mm pipes (requires optional
equipment)
To bevel pipes with diameters of 300
–600 mm (10–24’’), assemble the guide set
using an optional guide. To do this, remove the guide set (
1
,
2
, Fig. 6), use the 4 mm
hex wrench to unscrew the standard guide, and assemble the guide for 300
–600 mm
pipes (Fig. 10), tightening with the screws. Mount the rollers and adjust the required
bevel angle and width as described before.
Fig. 10.
Machine prepared for work on pipes with diameters 300
–600 mm
Part number:
PRW-0505-03-00-00-0
