BM-16
BM-
16 Operator’s Manual
6
2. SAFETY PRECAUTIONS
1. Before starting, read this
Operator’s Manual and complete proper occupational
safety and health training.
2. Machine must be used only in applications specified
in Operator’s Manual.
3. Machine must be complete and all parts must be genuine and fully operational.
4. Power supply specifications must conform to those specified on rating plate.
5. Never carry machine by cord or yank it to disconnect plug from socket. It may
cause power cord to break and result in electric shock.
6. Untrained bystanders must not be present near machine.
7. Before starting, check condition of machine and electrical installation, including
power cord, plug, control components, and milling tools.
8. Keep machine dry. Exposing it to rain, snow, or frost is prohibited.
9. Keep work area well lit, clean, and free of obstacles.
10. Never use machine near flammable fluids or gases, nor in explosive environments.
11. Never use blunt or damaged tools.
12.
Use only tools recommended by manufacturer and specified in Operator’s Manual.
13. Mount cutting inserts and milling head securely. Remove adjusting keys and
wrenches from work area before connecting plug to power socket.
14. Never use machine in upside down position with milling head facing up.
15. If cutting edge of insert is worn out, rotate insert in socket by 90° or 180° or, if all
edges are worn out, replace with new insert specified in
Operator’s Manual.
16. Before every use, inspect machine to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect machine operation.
17. Always use safety goggles, hearing protection, protective shoes, and protective
clothing during operation. Do not wear loose clothing.
18. Using spindle lock button during operation is prohibited.
19. Do not touch moving parts or metal chips formed during milling. Prevent objects
from being caught in moving parts.
20. After every use, remove metal chips from machine, particularly from milling head.
Never remove metal chips with bare hands.
21. Maintain machine and tools with care. Cover steel parts with thin grease layer to
protect them against rust when not in use for a longer period.
