BM-16
BM-
16 Operator’s Manual
12
3.6. Replacing cutting inserts
Unplug the power cord from power socket and, to achieve a better access to the
head, loosen the clamping screw (
1
) and maximally lower the sleeve (
2
) by rotating it
clockwise (Figure 7). Then, unscrew the bolt (
3
) using the screwdriver supplied with
the milling head, and take out the cutting insert (
4
). Clean the socket and place the
rotated insert again or replace with a new one if all four edges are worn out. Then,
push and tighten the insert.
Before replacing cutting inserts for rounding edges, loosen the guiding roller (
5
) with
5 mm Allen key.
Figure 7.
Method of replacing cutting inserts
Clean the threads once a week and, if necessary, grease the bolts that mount the
inserts using an agent that will prevent the bolts from blocking (e.g. copper paste).
3
1
2
4
5
