JEI DRILLING & CUTTING SOLUTIONS PRO 132T, Operator'S Manual

Page: 2 / 33

Contents
1. GENERAL INFORMATION ............................................................................................... 3
1.1. Application .................................................................................................................. 3
1.2. Technical data ............................................................................................................ 3
1.3. Equipment included .................................................................................................... 4
1.4. Dimensions ................................................................................................................ 5
1.5. Design ........................................................................................................................ 6
2. SAFETY PRECAUTIONS .................................................................................................. 7
3. STARTUP AND OPERATION ........................................................................................... 9
3.1. Installing the handles .................................................................................................. 9
3.2. Installing and removing the arbor, MT4 twist drill bit, or tap chuck .............................10
3.3. Installing and removing the annular cutter .................................................................12
3.4. Installing and removing the screw tap ........................................................................13
3.5. Installing and removing the cooling system ...............................................................14
3.6. Preparing ...................................................................................................................15
3.7. Drilling .......................................................................................................................17
3.8. Thread cutting ...........................................................................................................20
3.9. Adjusting the gibs ......................................................................................................21
3.10. Replacing the motor brushes...................................................................................22
4. ACCESSORIES ...............................................................................................................23
4.1. Pressure cooling system ...........................................................................................23
4.2. Arbor MT4 × 32 mm Weldon......................................................................................23
4.3. MT4 tap chuck × 31 mm with adapter ........................................................................24
4.4. MT4 tap chuck × 48 mm with adapter ........................................................................26
4.5. MT4 tap chuck × 60 mm with adapter ........................................................................29
5. DECLARATION OF CONFORMITY .................................................................................32
6. WARRANTY CARD ..........................................................................................................32