Verpackungseinheit
Checkliste
Türpaneele, bezogen
(rechts / links)
2
Abdeck-Blenden, bezogen
(rechts / links)
4
Hochtöner 26 mm
2
Mitteltöner 100 mm Q
(
jeweils mit 2 Blechschrauben am Paneel montiert)
2
Tieftöner 160 mm
(
jeweils mit 2 Blechschrauben am Paneel montiert)
8
Frequenzweichen
(rechts / links)
2
serieller Kabelsatz für Tieftöner
(rechts / links)
je 1
Kleinteile-Beutel:
Schrauben-Senkkopf, M 4 x 20
4
Schrauben-Senkkopf, M 4 x 30
6
6-Ktn.Mutter M 4
22
Unterlagscheiben Ø 20mm
22
Unterlagscheiben Ø 20mm
als Distanzhilfe für Klettverschlüsse
4
Blechschrauben, schwarz 3,9x13
(f. Tieftöner)
8
Klettband à 2,5 cm
(Reserve)
4
Kleinteile-bereits montiert:
Klettverschlüsse + Klettband
16
Schrauben-Senkkopf, M 4 x 20
2
Schrauben-Senkkopf, M 4 x 30
2
Schrauben-Senkkopf, M 4 x 40
2
Schrauben-Senkkopf, M 4 x 50
4
Blechschrauben, schwarz 3,9 x 13
(für Tieftöner)
8
Blechschrauben, schwarz 3,5 x 13
(4xMT+16xKlettv.)
20
Die Ware wurde sorgfältig verpackt und auf ihre Vollständigkeit geprüft. Bei Fehlmengen, Schäden oder Mängel
beachten Sie bitte unsere Garantieleistungen auf der Rückseite dieser Montageanleitung.
Kleinteile-Beutel:
Packliste Art. 75151
75151 - Audi A 4
Cabrio
- 13 -
© JEHNERT SOUND DESIGN
75151 - Audi A 4
Cabrio
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i s c h e I n f o r m a t i o n
Fahrzeugausstattung: elektrische Fensterheber
Modell/ Modelljahr: A4 Cabrio
Dämmung der Türen: empfohlen
Einstell-Hinweis: Um den optimalen Raumklang zu erzielen,
sollten am Radiogerät sämtliche Einstellungen
(Bass, Höhen, Loudness usw.) auf Null bzw.
neutral eingestellt werden
empfohlene
Verstärkerleistung: ab 2x 200 - 360 Watt sinus / 4 Ohm
Blechschneidearbeiten: entfallen
Lautsprecherausschnitte/ 4 x 144mm (max.Außenmaß Tieftöner 165 mm)
pro Seite
(max.Einbautiefe Tieftöner 65 mm)
Euro-Norm-Korb passend
1 x 92mm (max.Außenmaß Mitteltöner 100 mm)
(max.Einbautiefe Mitteltöner 55 mm)
Sound-System: 3-Wege
4 x 160 mm Tieftöner / Seite
1 x 100 mm Mitteltöner / Seite
1 x 26 mm Hochtöner / Seite
fahrzeugspezifische Frequenzweiche
Belastbarkeit Dauer / Musik: 2 x 300/500Watt
Übertragungsbereich: 49-22.000 Hz
Impedanz: 4 Ohm
Einbauzeit:
Einbauprofi: 3-4 Stunden
Änderungen, die dem technischen Fortschritt dienen, bleiben vorbehalten.
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
(with perforated sheet metal, hex nut M4, washer Ø 12 mm)
4
165
4
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
20
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
26
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
8
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing unit
Check list
door panel, covered
(right / left)
2
Speaker grill, covered
(right / left)
2
Tweeter 26 mm
(
with perforated sheet metal,6.Ktn.Screw M4x8,Washer ø 12mm)
2
Midrange 100 mm Q
(each mounted on the panel with 4 Sheet metal-screws)
2
Woofer 160 mm
(each mounted on the panel with 2 Sheet metal-screws)
8
Crossover
(right / left)
2
standard cables for subwoofer
(right / left)
2
Hardware bag:
Hexagon head screws, M 4 x 30
6
Hexagon head screws, M 4 x 40
4
Hexagon head screws, M 4 x 50
6
Spax screws 5,0 x 70
4
Spax screws 5,0 x 80
2
Hex nut M 4
16
Washer Ø 20mm
(incl. 4x
as spacer for Velcro fastener
)
18
Washer Ø 12mm
8
Sheet metal screws, black 3,9x13
(f. woofer)
16
Velcro strip à 2,5 cm
(reserve)
4
Preassembled hardware:
Velcro fastener plus strips
14
Sheet metal screws, black 3,9 x 13
(f. woofer)
16
Sheet metal screws, black 3,5 x 13
(f. midrange)
8
Sheet metal screws, black 3,5 x 13
(f. Velcro fastener)
14
The product was carefully packed and checked for its completeness. If you find anything missing, damaged or
defective, please notice our guarantee services on the back of these assembly instructions.
Hardware bag:
Packing list 75149
75149 - BMW Z 3
- 13 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 2 -
© JEHNERT SOUND DESIGN
T e c h n i c a l i n f o r m a t i o n
Equipment: electric window control
Model/ year : Roadster / Coupé / M3
Insulation:
is absolutely necessary !
Note about setting: To obtain optimal stereoscopic sound, all settings
on the radio (bass, treble, loudness etc) should be
set to zero or neutral.
Recommended
amplifier power : from 2x 200 - 360 Watt RMS / 4 Ohm
Metal cutwork : not necessary
Cut-outs for loudspeaker/ 4 x 144mm (max.outer dimensions subwoofer 165 mm)
each side
(max.installation depth subwoofer 65 mm)
DIN-Euro-Norm-standard basket ø 6“
made it fit
1 x 92mm (max.outer dimensions midrange 100 mm)
(max.installation depth midrange 50 mm)
Sound-System: 3-ways
4 x 160 mm subwoofer/ side
1 x 100 mm midrange / side
1 x 26 mm tweeter / side
car-customized crossover network
max.continuous Watt/RMS:
2 x 300/500Watt
car specific frequency range: 49-22.000 Hz
Total impedance:
4 Ohm
Time for Installation car hifi-specialist: 3,5 hours
We reserve the right to make technical changes, as well as development.
