3
USER MANUAL v1.2
JEFPDB0550
550W
Bench Drill • 230V ~50Hz
www.jeffersontools.com
Specifications:
A
Max Drilling Diameter
16mm (5/8")
Motor Power
550W
Chuck Capacity
3-16mm
Input Voltage - Frequency
230V - 50Hz
B
Spindle Travel
80mm
Number of Speeds
16
Speed 50Hz
180-2770rpm
C
Spindle Taper
MT2
E
Max. distance from spindle end to surface of table
450mm
F
Max. distance from spindle end to surface of base
630mm
Swing
325mm
Table Size
250 x 250mm
Base Size
420 x 250mm
G
Column Diameter
92mm
H
Height
980mm
NW/GW
42kg / 45kg
Safety Information:
Warning: this symbol is used throughout the instructions whenever there is a risk of personal injury. Ensure that these warnings are
read and understood at all times. When using electric tools, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and personal injury: You should not operate this machine unless you are thoroughly familiar with drilling machines
and drilling techniques. If there is any doubt whatsoever you should consult a qualified person.
Please read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury. Store this instruction manual in a safe place for future reference.
General Safety
•
Always ensure that air can circulate around the machine and that the air vents are unobstructed.
•
Always keep work area clean & tidy. Cluttered work areas and benches increase the risk of accidents and injury.
•
Never over-reach. Maintain a balanced footing at all times.
•
Never use or store this equipment in a wet/damp environment or expose to rain.
•
Keep untrained personal, children and pets away from the work area.
•
Never operate a machine when under the influence of alcohol, drugs or medication.
•
Always ensure the workplace is well lit. Ensure that lighting is placed so that you will not be working in your own shadow.
•
Do not use tools in the presence of flammable liquids or gasses.
•
Stay alert at all times, watch what you are doing, use common sense and do not operate the tool when you are tired.
