2
USER MANUAL v1.2
JEFPDB0550
550W
Bench Drill • 230V ~50Hz
www.jeffersontools.com
Contents:
About This Document:
2
Introduction
2
Specifications
3
Safety Information
3
Parts Identification
5
Unpacking & Working Environment
5
Assembly Instructions
6
Settings & Adjustments
7
Using Straight Shank Drill Bits
7
Using Morse Taper Drill Bits
7
Pre-Setting The Drilling Depth Bench Type
8
Adjusting Speed Settings
8
Operation Guide
8
Drilling
9
Maintenance
9
Troubleshooting
10
Circuit Diagram
11
Parts Lists & Diagram
12
Environmental Protection
16
WEEE Waste Electrical and Electronic Equipment Statement
16
RoHS Directive 2011/65/EU
16
EC Declaration of Conformity
17
Limited Warranty Statement
18
About This Document:
This manual has been compiled by Jefferson Tools and is an integrated part of the product with which it's enclosed and should be kept with it for
future reference. Please read all of the information supplied in this User Manual before operating this product.
This manual describes the purpose for which the product has been designed and contains all the necessary information to ensure its correct and
safe use. We recommend that you read the information supplied before carrying out any maintenance or repair. By following all the general safety
instructions contained in this manual you will help to ensure operator safety and extend the potential life span of the equipment.
All photographs and drawings in this manual are supplied by Jefferson Tools to help illustrate the operation of the product. Whilst every effort
has been made to ensure accuracy of information contained in this manual our policy of continuous improvement determines the right to make
modifications without prior warning.
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the equipment. Some
illustrations in this Instruction Manual may show details or attachments that differ from those on your own model. Contact your nearest Jefferson
Dealer if you are unsure about any information included in this manual or require any additional information about the safe use, operation
maintenance, or repair of this equipment.
Introduction:
This equipment has been designed for drilling large or small holes in metal, wood, plastic, etc.
Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the
safety of yourself and that of others around you and will help to ensure long and reliable service from the equipment.
