f. Replace upper half-door.
NOTE:
If the compression is increased too much on the front
upper corner of the rear doors, deformation of the seal
will occur.
Half-Door Removal
To remove the half-doors, repeat the installation steps
in reverse order.
NOTE:
When removing the upper half-doors, push upward
firmly on the middle of the upper half-door until the
posts detach from the lower half.
Half-Door Mirror Installation — PHEV Only
In PHEV models, the exterior mirrors for the half-doors
are shipped separately and will need to be installed.
To install the front door exterior mirrors on the half-
doors, proceed as follows:
1. Locate the wiring harness on the outside of the front
half-door.
2. Insert the wiring harness firmly into the connection
on the driver’s side exterior mirror.
Press Shim Firmly Into Bottom Of Pocket
1 — Remove Paper Backing From Shim
2 — Slide Pencil through Hole In Shim
3 — Press Pencil With Shim Into Pocket
Push Upward On Middle Of Upper Half Door To Remove
Wiring Harness Location
Connect Wiring Harness To Exterior Mirror
1 — Wiring Harness
2 — Exterior Mirror
GETTING TO KNOW YOUR VEHICLE
55
2
5538906_24_JL_OM_EN_USC_t_E1.pdf 55
5/22/2023 9:02:18 AM