GETTING TO KNOW YOUR VEHICLE
9
Max Regeneration
Max Regeneration is a supplemental feature of the
RBS. When activated, it will use the RBS to help
slow the vehicle when the driver releases the
accelerator pedal. This feature allows you to
moderately reduce driving speed without pressing
the brake pedal. It is always necessary to apply the
brake pedal to bring the vehicle to a complete stop.
Max Regeneration Button
This feature can be activated by pressing the Max
Regeneration button, located above the radio screen.
NOTE:
The Max Regeneration feature will remain on once
selected, even after the vehicle is restarted.
E-S
ELEC
M
ODE
This system allows the driver to select different
modes by pushing the following buttons located
above the headlight switch.
E-Selec Mode Switch
Hybrid: Prioritizes electric range first, then gas
range.
Automatically switches between using gas
and battery for greatest efficiency and
performance.
Best heating/cooling and acceleration
performance.
Electric: Prevents the engine from running, unless
you absolutely need it.
Driving in electric mode allows the vehicle to use
up to the full capability of the electric drivetrain,
and if the electric drivetrain is operating at its
peak power, then pressing the accelerator pedal
more will not result in more power. To access the
full capability of the engine plus electric motors,
switch to Hybrid or e-Save.
Engine will switch on during a Wide Open Throttle
(WOT) event, or if cruise control requires it.
Vehicle will switch to hybrid mode upon reaching
< 1% State of Charge (SOC) or due to system
needs.
For information on where to view your vehicle’s
SOC. See
e-Save: Aims to maintain a high level of SOC/Electric
range for later use. It can be customized in settings
to increase the SOC to predefined levels..
e-Save settings can be found in the
Uconnect Hybrid Electric App.
When e-Save is selected on a fully charged
vehicle, the SOC will drop slightly for optimal
performance.
The Battery Save setting aims to maintain the
SOC at the current level. Under heavy load, such
as while pulling a trailer, SOC may decrease.
When coasting, the SOC may increase.
The Battery Charge setting uses power from
the engine to increase SOC to the selected
target. If the SOC is above the target when
e-Save mode is activated, then the vehicle
will automatically switch between gas and
battery until SOC reaches the target.
The e-Save mode button must be pressed to
activate Battery Save or Battery Charge.
2
Summary of Contents for GRAND CHEROKEE 4XE 2022
Page 2: ......
Page 34: ...32 GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER 22_WL_H_SU_EN_USC_t book Page 32 ...
Page 71: ......
