Jeep GRAND CHEROKEE 4XE 2022, Manual, Page: 42 / 72

40 GETTING TO KNOW YOUR INSTRUMENT PANEL

Advanced: Speed, Speed Limit, Navigation,
Driver Assist (ACC/Cruise, Active Lane
Management, Active Driving Assist), Gear
Advanced Mode
When “Advanced” mode is selected, the HUD
displays the vehicle speed, turn-by-turn naviga -
tion, speed limit, driver assist function(s), and
current gear.

Custom 1: Speed, Speed Limit

Custom 2: Speed, Speed Limit, Navigation

Custom 3: Speed, Speed Limit, Navigation,
Driver Assist (ACC/Cruise, Active Lane
Management, Active Driving Assist)

Custom 4: Speed, Speed Limit, Navigation,
Driver Assist (ACC/Cruise, Active Lane
Management, Active Driving Assist), Gear

Display Height

Brightness
NOTE:

The HUD basic settings (Brightness, Display
Height and Non Custom layouts), are controlled
through the Settings Screen in the Instrument
Cluster
Ú
page 33.
NOTE:
If current theme is set to Digital, tachometer will
not display while in the Settings menu.
WARNING LIGHTS AND MESSAGES
The warning/indicator lights will illuminate in the
instrument panel together with a dedicated
message and/or acoustic signal when applicable.
These indications are indicative and precautionary
and as such must not be considered as exhaustive
and/or alternative to the information contained in
the Owner’s Manual, which you are advised to read
carefully in all cases. Always refer to the information
in this chapter in the event of a failure indication.
All active telltales will display first if applicable.
The system check menu may appear different based
upon equipment options and current vehicle status.
Some telltales are optional and may not appear.
R
ED
W
ARNING
L
IGHTS
Hybrid Electric Vehicle System Service
Warning Light
This warning light will illuminate when
service to the hybrid electric system is
needed. It will be accompanied by a
message in the cluster. If the telltale
stays on or continues to come on, contact an
authorized dealer as soon as possible.
Plug Status Fault Warning Light
This warning light will illuminate when a
plug status fault is detected (when vehicle
not in motion). It will be accompanied by a
cluster message indicating the type of
fault. You may receive one of the following messages
if a fault is detected:

Service Charging System – If you see a service
charging system message, it is recommended to
unplug and plug in again, or try a different
charging station. If an issue continues, contact
an authorized dealer.

Issue Detected Check External Charging
Station – If you see an issue detected message,
the charging station might be powered off, have
an internal fault or be scheduled to charge later.
It is recommended to try a different charging
station. If an issue continues, then contact an
authorized dealer.
22_WL_H_SU_EN_USC_t.book Page 40