manualshive.com logo in svg

Jeep GRAND CHEROKEE 4XE 2022, Manual, Page: 60 / 72

Share
Download
Jeep GRAND CHEROKEE 4XE 2022 Manual Download Page 60

58

SERVICING AND MAINTENANCE

 

F

USES

General Information

The fuses protect electrical systems against 

excessive current.
When a device does not work, you must check the fuse 

element inside the blade fuse for a break/melt.
Also, please be aware that using power outlets for 

extended periods of time with the engine off may 

result in vehicle battery discharge.

Blade Fuses

Underhood Fuses

The Power Distribution Center (PDC) is located on 

the passenger side of the engine compartment, 

behind the headlamp. This center contains cartridge 

fuses, micro fuses, relays, and circuit breakers. 

A description of each fuse and component may be 

stamped on the inside cover, otherwise the cavity 

number of each fuse is stamped on the inside cover 

that corresponds to the following chart.

WARNING!

When replacing a blown fuse, always use an 

appropriate replacement fuse with the same amp 

rating as the original fuse. Never replace a fuse 

with another fuse of higher amp rating. The use of 

a fuse with a rating other than indicated may 

result in a dangerous electrical system overload. 

If a properly rated fuse continues to blow, it indi

-

cates a problem in the circuit that must be 

corrected. Never replace a blown fuse with metal 

wires or any other material. Do not place a fuse 

inside a circuit breaker cavity or vice versa. Failure 

to use proper fuses may result in serious personal 

injury, fire and/or property damage.

Before replacing a fuse, make sure that the 

ignition is off and that all the other services 

are switched off and/or disengaged.

If the replaced fuse blows again, contact an 

authorized dealer.

If a general protection fuse for safety systems 

(air bag system, braking system), power unit 

systems (engine system, transmission 

system) or steering system blows, contact an 

authorized dealer.

1 — Fuse Element
2 — Blade Fuse with a good/functional fuse

element
3 — Blade fuse with a bad/not functional fuse

element (blown fuse)

CAUTION!

When installing the power distribution center 

cover, it is important to ensure the cover is 

properly positioned and fully latched. Failure to 

do so may allow water to get into the power 

distribution center and possibly result in an 

electrical system failure.

22_WL_H_SU_EN_USC_t.book  Page 58  

Summary of Contents for GRAND CHEROKEE 4XE 2022









































































Reviews:

No comments