Jeep GRAND CHEROKEE 2023, Owner'S Manual

Page: 90 / 394

GETTING TO KNOW YOUR INSTRUMENT PANEL 89
E
NGINE
O
IL
L
IFE
R
ESET
Oil Change Required
Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Due” message will
display for approximately five seconds after a single chime
has sounded, to indicate the next scheduled oil change
interval has been reached. The engine oil change indicator
system is duty cycle based, which means the engine oil
change interval may fluctuate due to ambient
temperatures, engine warm-up and personal driving style.
Unless reset, this message will continue to display each
time the ignition is placed in the ON/RUN position. To turn
off the message temporarily, push and release the OK or
arrow buttons. To reset the oil change indicator system
(after performing the scheduled maintenance), refer to
the following procedure.
Vehicles Equipped With Keyless Enter ‘n Go™ — Ignition
Use the steering wheel instrument cluster display controls
for the following procedure(s):
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition in the
ON/RUN position (do not start the engine).
2. Push and release the down arrow button to scroll
downward through the main menu to “Vehicle Info.”
3. Push and release the right arrow button to access
the “Oil Life” screen.
4. Push and hold the OK button to reset oil life. If
conditions are met, the gauge and numeric display
will update to show 100%. If conditions are not met,
a pop-up message of “To reset oil life engine must be
off with ignition in run” will be displayed (for five
seconds), and the user will remain at the Oil Life
screen.
5. Push and release the up or down arrow button
to exit the submenu screen.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within 10 seconds.
3. Without pushing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset.
If necessary, repeat this procedure.
I
NSTRUMENT
C
LUSTER
D
ISPLAY
M
ENU
I
TEMS
The instrument cluster display can be used to view the
main menu items for several features. Use the up
and
down arrow buttons to scroll through the driver
interactive display menu options until the desired menu is
reached.
NOTE:
Depending on the vehicle’s options, feature settings may
vary.
23_W7_OM_EN_IN_t.book Page 89