Jeep GRAND CHEROKEE 2023, Owner'S Manual

Page: 149 / 394

148 STARTING AND OPERATING

When the system senses a lane drift situation, the left
lane line turns solid yellow. At this time, steering assist
warning is applied to the steering wheel in the opposite
direction of the lane boundary.
For example: If approaching the left side of the lane the
steering wheel will turn to the right.
Lane Drift (Solid Yellow Line)
 When the system senses the lane line is being crossed,
the left lane line changes from solid yellow to flashing
yellow (on/off). At this time, vibration is applied to the
steering wheel.
For example: If approaching the left side of the lane the
steering wheel will turn to the right.
Lane Crossed (Flashing Yellow Line)
NOTE:
 The Active Lane Management system operates with
similar behavior for a right lane departure.
 If the turn signal is activated, and the vehicle begins to
depart the lane at the same time the Blind Spot Moni -
toring (BSM) system detects another vehicle in the
BSM zones, the system will provide a haptic steering
wheel vibration and/or steering assist torque (if
programmed in Uconnect Settings).
C
HANGING
A
CTIVE
L
ANE
M
ANAGEMENT
S
TATUS
Configurable settings for the Active Lane Management
system are available within the Uconnect system
Ú
page 168.
Selectable Warning Types:
 Vibration Only

Steering Assist Only

Vibration And Steering Assist
Other configurable settings for this system are for the
intensity of the vibration (high/med/low), steering assist
warning (hi/med/low), and the warning zone sensitivity
(early/medium/late).
NOTE:

The system will not apply vibration and/or steering
assist to the steering wheel whenever a safety system
engages (Anti-Lock Brakes, Traction Control System,
Electronic Stability Control, Forward Collision
Warning, etc.).

The Blind Spot Monitoring system will be forced on
when the ALM system is enabled.
23_W7_OM_EN_IN_t.book Page 148