Jeep GRAND CHEROKEE 2023, Owner'S Manual

Page: 58 / 394

GETTING TO KNOW YOUR VEHICLE 57
MAX Defrost Button
Push the MAX Defrost button to change the
current airflow setting to Defrost mode. The
indicator illuminates when this feature is on.
Performing this function will cause the
automatic climate controls to change to manual mode,
and the following settings will occur:

The blower speed increases to full (all LEDs on)

The rear blower is off
 The air conditioning compressor is turned on
(A/C LED off)
 Both driver and passenger temperature controls are
set to HI
 Defrost mode is selected (LED on)
 Rear defroster is turned on (LED on)

The air recirculation is turned off (LED off)
If MAX Defrost mode is turned off, the Climate Control
system will return to the previous setting. MAX Defrost
automatically turns off after 20 minutes.
Rear Defrost Button
Press and release the button on the
touchscreen, or push and release the
button on the faceplate, to turn on the
rear window defroster and the heated outside
mirrors (if equipped). The Rear Defrost indicator
illuminates when the rear window defroster is on. The rear
window defroster automatically turns off after 10 minutes.
Rear Climate Control Button — If Equipped
Press and release this button on the
climate control touchscreen to access the
rear climate controls. The Rear Climate
indicator will illuminate when the rear climate
controls are ON.
Driver And Passenger Temperature
Switches
These switches provide the driver and passenger with
independent temperature control.
Lift the driver’s or passenger’s side toggle
switch on the faceplate upward, or press and
slide the temperature bar towards the red
arrow button on the touchscreen for warmer
temperature settings.
Depress the driver’s or passenger’s side toggle
switch on the faceplate downward, or press
and slide the temperature bar towards the blue
arrow button on the touchscreen for cooler
temperature settings.
CAUTION!
Failure to follow these cautions can cause damage to
the heating elements:

Use care when washing the inside of the rear
window. Do not use abrasive window cleaners on the
interior surface of the window. Use a soft cloth and a
mild washing solution, wiping parallel to the heating
elements. Labels can be peeled off after soaking
with warm water.

Do not use scrapers, sharp instruments, or abrasive
window cleaners on the interior surface of the
window.

Keep all objects a safe distance from the window.
23_W7_OM_EN_IN_t.book Page 57