Jeep GRAND CHEROKEE 2023, Owner'S Manual

Page: 59 / 394

58 GETTING TO KNOW YOUR VEHICLE
SYNC Button
Press the SYNC button on the touchscreen to
toggle the SYNC feature on/off. The SYNC
indicator illuminates when SYNC is on. SYNC is
used to synchronize the front passenger
temperature and rear passenger temperature, mode, and
blower settings with the driver temperature, mode, and
blower settings. Changing the front passenger
temperature or rear passenger temperature, mode, and
blower settings while in SYNC will automatically exit this
feature.
NOTE:
 The SYNC setting is only available on the touchscreen.

For vehicles equipped with the Four-Zone ATC system,
the rear climate control settings (temperature, blower
speed, and mode) will change to match the driver’s
settings when the vehicle is first started, without
changing the SYNC status.

When SYNC is not active, the rear passenger climate
control settings will need to be adjusted manually to
achieve desired comfort. See
Ú
page 59 or
Ú
page 60
for more information.
Blower Control
Blower Control is used to regulate the amount
of air forced through the Climate Control
system. There are several blower speeds
available.
Blower speed can be controlled by lifting blower toggle on
the instrument panel to increase blower speed, or by
depressing the toggle for lower blower speed.
The speed can also be selected using the blower control
buttons on the touchscreen. Press the blower bar area
between the icons on the touchscreen.
Mode Control
Select Mode by pressing one of the Mode
buttons on the touchscreen, or the faceplate,
to change the airflow distribution mode. The
airflow distribution mode can be adjusted so air
comes from the instrument panel outlets, floor outlets,
defrost outlets and demist outlets.
Panel Mode
Air comes from the outlets in the instrument
panel. Each of these outlets can be individually
adjusted to direct the flow of air. The air vanes
of the center outlets and outboard outlets can
be moved up and down or side to side to regulate airflow
direction. There is a shut-off wheel located next to the air
vanes to shut off or adjust the amount of airflow from
these outlets.
Bi-Level Mode
Air comes from the instrument panel outlets
and floor outlets. A slight amount of air is
directed through the defrost and side window
demister outlets.
NOTE:
Bi-Level mode is designed under comfort conditions to
provide cooler air out of the panel outlets and warmer air
from the floor outlets.
For more information on selecting modes, see
Ú page 59.
Floor Mode
Air comes from the floor outlets. A slight
amount of air is directed through the defrost
and side window demister outlets.
23_W7_OM_EN_IN_t.book Page 58