8
Feb 27, 2012
82213173 REV. 0
Display Modes:
blinking
Gain Setting
blinking
Sync Setting
Error Codes:
Standby w/o Trailer
Connected
Trailer Disconnected
Output Overload
Brake Lamp Overload
Standby with Trailer
Conected
Brake Power Output
Setup and Adjustment:
Preliminary Adjustment
$GMXVWWKH*DLQ6HWWLQJWRE\WXUQLQJWKHWKXPEZKHHOOHIWRUULJKWDVQHHGHG1RZPRYHWKH6\QF6HWWLQJ
slightly, the display will change to the Sync Setting.
$GMXVWWKH6\QF6HWWLQJWR/E\VOLGLQJWKHFRQWUROIRUZDUGRUEDFNZDUGDVQHHGHG
Test Drive
,QDQRSHQDUHDVXFKDVDODUJHSDUNLQJORWGULYHIRUZDUGDQGDSSO\WUDLOHUEUDNHVXVLQJ0DQXDO2YHUULGH
,IWKHWUDLOHUEUDNHVDUHZHDNLQFUHDVHWKH*DLQ6HWWLQJ,IWKHWUDLOHUEUDNHVMHUNRUORFNWKHZKHHOVGHFUHDVHWKH
Gain Setting.
5HSHDWWKHVWHSDERYHXQWLOILUPEUDNLQJLVIHOWZLWKRXWMHUNLQJRUORFNLQJXSWKHWUDLOHUZKHHOV
2QFHWKH*DLQ6HWWLQJLVVHWGULYHIRUZDUGDQGSUHVVWKHEUDNHSHGDOWKHWRZYHKLFOHDQGWKHWUDLOHUVKRXOGPDNH
a smooth stop.
,IWKHVWRSVHHPVVORZDQGPRUHDJJUHVVLYHEUDNLQJLVGHVLUHGLQFUHDVHWKH6\QF6HWWLQJ,IWKHVWRSVHHPVWRR
aggressive decrease the Sync Setting.
0DNHVHYHUDOVWRSVDWYDULRXVVSHHGVDQGDGMXVWWKH6\QFVHWWLQJXQWLOVWRSVDUHVPRRWKDQGILUP6OLJKWDGMXVWPHQW
RIWKH*DLQ6HWWLQJPD\DOVREHGHVLUDEOH
NOTE: If any problems occur during Setup, refer to the Troubleshooting section.
NOTE: Display will turn off
after 10 minutes in
standby mode.
NOTE: Output Overload will continue to display until the error is rectified (Refer to Troubleshooting Guide
Section) or power is removed from the Brake Control.
Trailer Disconnected will continue to display for 10 seconds then revert to Standby w/o Trailer
Connected if error is not rectified (Refer to Troubleshooting Guide Section).
blinking
blinking
