4
Feb 27, 2012
82213173 REV. 0
17. Route the Brake Control Harness to the opening of
the air vent in the hush panel.
18. Re-install the hush panel.
19. Drill pilot holes in the hush panel using a Power
drill with a 1/8” drill bit.
14. Position the Bracket of the Brake Control on the
recommended mounting location which is near the
center console in front of the air vent. Align bracket
to optimal mounting area.
15. Ensure the area behind the mounting location is
free of obstructions.
16. Use the mounting holes in the wing tips of the
bracket as a guide, mark mounting holes.
