3
Feb 27, 2012
82213173 Rev. 0
8. Using a 12mm socket wrench, loosen the nut (A)
that holds tight the negative battery terminal.
9. Remove the Negative Terminal of the Battery and
set aside carefully.
10. Route the Brake Control Harness behind the
Diagnostic (ODBII) Connector.
11. Secure the harness using 6” cable tie to the
bracket of the courtesy light (A).
12. Secure a second point of the brake control harness
to the dash panel harness (B).
13. Route the Brake Control Harness behind the air
vent, and secure it to the bracket (A) using 6” cable
tie.
A
A
B
A
