background image

The driver may manually override the haptic
warning by applying torque into the steering
wheel at any time. When only a single lane
marking is detected and the driver unintention-
ally drifts across the lane marking (no turn
signal applied), the LaneSense system provides
a visual warning through the instrument cluster
display to prompt the driver to remain within
the lane. When only a single lane marking is
detected, a haptic (torque) warning will not be
provided.

NOTE:

The LaneSense system can be customized and
turned off through the Uconnect System touch-
screen.

For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Ca-
nadian Residents).

Parksense Active Park Assist
System — If Equipped

The ParkSense Active Park Assist system is in-
tended to assist the driver during parallel and
perpendicular parking maneuvers by identifying
a proper parking space, providing audible/visual
instructions, and controlling the steering wheel.
The ParkSense Active Park Assist system is de-
fined as “semi-automatic” since the driver main-
tains control of the accelerator, gear selector and
brakes. Depending on the driver's parking maneu-
ver selection, the ParkSense Active Park Assist
system is capable of maneuvering a vehicle into
a parallel or a perpendicular parking space on
either side (i.e., driver side or passenger side).

NOTE:

• The driver is always responsible for controlling

the vehicle, responsible for any surrounding
objects, and must intervene as required.

• The system is provided to assist the driver

and not to substitute the driver.

• During a semi-automatic maneuver, if the

driver touches the steering wheel after being
instructed to remove their hands from the
steering wheel, the system will cancel, and
the driver will be required to manually com-
plete the parking maneuver.

• The system may not work in all conditions

(e.g. environmental conditions such as heavy
rain, snow, etc., or if searching for a parking
space that has surfaces that will absorb the
ultrasonic sensor waves).

• New vehicles from the dealer must have at

least 30 miles (48 km) accumulated before
the ParkSense Active Park Assist system is
fully calibrated and performs accurately.
This is due to the system’s dynamic vehicle
calibration to improve the performance of
the feature. The system will also continu-
ously perform the dynamic vehicle calibra-
tion to account for differences such as over
or under inflated tires and new tires.

PARKSENSE

Summary of Contents for Cherokee 2019

























Reviews: