Jeep Baby Traveller Portacot, Instructions Manual

Page: 9 / 20

9
4
Lift each top rail until it locks.
• Top rails automatically lock when lifted fully.
• Top rails cannot lock if the floor is flattened
first.
• If one or more of the top rails will not lock,
pull sharply on centre floor handle to make
sure floor joint(s) are unlocked.
• Check that all four top rails are locked
proceeding to Step 6.
Push down floor and fold floor
handle over. Floor handle will
lock automatically.
Install floor pad, padded side up.
Thread velcro straps through floor
and fold over under the floor.
Repeat for all corners.
Do not use portable cot without
floor pad.
NOTE: If using mattress overlay
ensure all 4 sides are secured
by velcro tabs.
5
6
4
5
6