Jeep Baby Traveller Portacot, Instructions Manual

Page: 3 / 20

3
Please take a moment to read through these instructions
before you use your Jeep Portable Cot.
®
• NEVER leave child unattended. ALWA
IMPORTANT
BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND
THE INSTRUCTIONS. INCORRECT ASSEMBLY MAY MAKE THE
COT UNSAFE. DO NOT USE THIS COT IF ANY PART IS BROKEN,
TORN OR MISSING. KEEP THESE INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE.
YS keep child in full view.
• Cot MUST be fully assembled with all top rails locked into position
prior to attaching bassinet and changing table.
• DO NOT place child in cot unless all top rails are securely locked
into position and floor pad is in proper place. Infant may roll into
space between pad and loose mesh sides causing suffocation.
• This portable cot is intended for use by a child who cannot climb
out of the cot, is less than 89cm tall and weighs less than 14kg.
• DO NOT use this cot if the covering material has been bitten through.
• MATTRESS SIZE: This cot is made to use a mattress which is
630mm wide, 960mm long and no more than 24mm thick. Using the
wrong size mattress may create hazardous gaps that could result in
suffocation or could reduce the side height of the cot which may
result in your child falling out from the cot.
• When using the reversible mattress pad, ALWAYS fully secure it
to the mattress using the velcro tabls.
• Carefully read the warning on canopy to avoid heat exposure.
• DO NOT use bassinet or changing table when child is in cot.
• STOP using the bassinet or changing table when your infant is 3mths
old or weighs more than 6.8kg.
• To prevent injury from falls, DO NOT use bassinet or changing table
when child is able to sit up or roll or push up on hands and knees.
• Use all clips to attach bassinet and changing table to the cot.
Make sure clips are fully snapped into place. DO NOT use if any
clips are broken or missing.