Jeep Baby Traveller Portacot, Instructions Manual

Page: 4 / 20

4
• ALWAYS use restraint system when changing child on the changing
table.
• ALWAYS keep child within arms reach when using the changing
table.
• DO NOT use bassinet or changing table on a bed, floor or other
surfaces.
• The bassinet and changing table are designed for use ONLY with
this Jeep Portable Cot. Only use bassinet and changing table
provided by the manufacturer.
• DO NOT use the changing table as a sleeping or play area.
• Before each use or assembly of product, inspect for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT use
this product if any parts are missing or broken. Contact Born with
Style for replacement parts and instructional literature if needed.
DO NOT use suitable parts.
• Although Born with Style DOES NOT RECOMMEND refinishing this
product, if you choose to refinish, use a nontoxic finish specified
only for children’s products.
AVOID SUFFOCATION HAZARDS:
• To prevent suffocation from entrapment, use only the floor pad
provided by manufacturer.
• Ensure mattress pad is fully secured using velcro tabs.
• If a sheet is used, only use a fitted crib sheet that tucks at least 5cm
under the bassinet and changing table or floor pad on all sides to
avoid entanglement.
• When using bassinet, make sure floor pad sits flat against floor of
bassinet.
• DO NOT leave child in product with any side lowered. Be sure all
sides are raised and locked in position at all times.
• NEVER use plastic shipping bags as mattress covers. Do not use
plastic film as mattress cover unless sold and intended for that
purpose. They can cause suffocation.
• DO NOT use a water mattress with this product.
• DO NOT use extra mattress pad on bassinet.
• DO NOT leave anything in the cot such as toys, that can provide a
foothold.
®