Jeep 2018 WRANGLER, User Manual

Page: 34 / 336

Rear Head Restraints — Two Door Models
The rear seat is equipped with non-adjustable,
but foldable head restraints.
To fold the outboard head restraint, pull on
the release strap located on the upper out-
board side of each rear seat.
To return the head restraint to its upward
position, lift up on the head restraint until it
locks into place.
Refer to “Occupant Restraint Systems” in
“Safety” for information on child seat tether
routing.
WARNING!
• Do not drive the vehicle without the rear
seat head restraints installed while pas-
sengers are occupying the rear seat. In a
collision, people riding in this area with-
out the head restraints installed are
more likely to be seriously injured or
killed.
• A loose head restraint thrown forward in
a collision or hard stop could cause
serious injury or death to occupants of
the vehicle. Always securely stow re-
moved head restraints in a location out-
side the occupant compartment.
• ALL the head restraints MUST be rein-
stalled in the vehicle to properly protect
the occupants. Follow the reinstallation
instructions above prior to operating the
vehicle or occupying a seat.
Rear Head Restraint Folding Strap
Location
Rear Head Restraints Folded
GETTING
TO
KNOW
YOUR
VEHICLE
32