Jeep 2018 WRANGLER, User Manual, Page: 27 / 336

Rear Door Removal (Four-Door Models)
WARNING!
Do not drive your vehicle on public roads
with the doors removed as you will lose the
protection they can provide. This proce-
dure is furnished for use during off-road
operation only.
WARNING!
• All occupants must wear seat belts during
off-road operation with doors removed.
• Do not store detached doors inside of the
vehicle, as they may cause personal in-
jury in the event of an accident. Refer to
“Off-Road Driving Tips” in “Starting And
Operating” in the Owner’s Manual for
further information.
NOTE:
• Doors are heavy; use caution when removing
them.
• Hinge pin can break if overtightened during
door reinstall (Max Torque: 7.5 ft· lb / 10 N·m).
• Refer to “Off-Road Driving Tips” in “Starting
And Operating” in the Owner’s Manual for
further information.
1. Roll down the glass window to prevent any
damage.
2. Remove the hinge pin screws from the
upper and lower outside hinges (using a
#T50 Torx head driver).
NOTE:
The hinge pin screws and nuts can be
stowed in the rear cargo tray located under
the rear load floor.
3. Slide the front seat(s) fully forward.
4. Pry open and remove the plastic wiring
access door from the bottom of the B-pillar.
Door Removal Warning Label
Hinge Pin Screw
25