Jeep 2018 WRANGLER, User Manual, Page: 54 / 336

9. While pushing downward slightly on the
folded soft top, slide the lock lever on the
left and right side lift assist mechanisms
to the “lock” position.
10. Once the lock is in the “lock” position,
push downward on each side of the
folded soft top to ensure it is secure. An
audible “click” may be heard.
NOTE:
Secure the top by using the two hook-and-
loop fasteners provided in the center con-
sole.
To Raise The Soft Top
Follow these simple steps to raise the soft top:
1. From the fully lowered position, remove
straps if previously secured.
2. While pushing down on the folded soft
top, slide the lock lever on the left and
right side Lift Assist Mechanisms to the
“unlock” position.
3. Push up and forward from underneath the
folded soft top along the guide track until
it locks into the Sunrider position with an
audible “click”.
4. Using the side link, lift and push the soft
top toward the front of the vehicle guiding
the top into the closed position.
5. From inside the vehicle, pull the handle
on the header latch downward to engage
the hook into its receiver. Then, pull the
handle back upward while squeezing the
latch plate, locking the latch into place.
Repeat on the other side.
Lock Position
Push Downward To Lock In Place
GETTING
TO
KNOW
YOUR
VEHICLE
52