Jeep 2016 Wrangler Owner'S Manual Download | Manualshive

Page: 663 / 705

background image

CAUTION!

•

Mixing of engine coolant (antifreeze) other than
specified Organic Additive Technology (OAT) en-
gine coolant (antifreeze), may result in engine
damage and may decrease corrosion protection.
Organic Additive Technology (OAT) engine cool-
ant is different and should not be mixed with
Hybrid Organic Additive Technology (HOAT) en-
gine coolant (antifreeze) or any “globally compat-
ible” coolant (antifreeze). If a non-OAT engine
coolant (antifreeze) is introduced into the cooling
system in an emergency, the cooling system will
need to be drained, flushed, and refilled with fresh
OAT coolant (conforming to MS.90032), by an au-
thorized dealer as soon as possible.

(Continued)

CAUTION!

(Continued)

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the radiator engine coolant and
may plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (an-
tifreeze) is not recommended.

7

MAINTAINING YOUR VEHICLE

661

«
...
661
662
663
664
665
...
»

Summary of Contents for 2016 Wrangler


































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Wrangler

Brand: Garmin Pages: 2

Brand: Harbor Freight Tools Pages: 4

RadioPRO 5 RP5-GM41

Brand: PAC Pages: 3

Brand: RACLET Pages: 48

Brand: RACLET Pages: 31

Prestige APS-45B

Brand: Audiovox Pages: 8

Brand: Volvo Pages: 138

Brand: Cargo Floor Pages: 16

Brand: Lexus Pages: 369

Brand: Mountain Top Pages: 12

Brand: Phonocar Pages: 2

SmartShot Automatic 12V 1.5 Amp 5 Stage

Brand: Yuasa Pages: 44

Brand: Würth Pages: 36

Brand: Volvo Pages: 10

2014 Grand Cherokee SRT8

Brand: Jeep Pages: 596

Brand: Skoda Pages: 4

Electra 225 1965

Brand: Buick Pages: 914

Brand: Great Wall Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands