Jeep 2016 Wrangler Owner'S Manual Download Page 221

Page: 221 / 705

Door Frame Removal

1. Unscrew and remove the door frame attachment

knobs (two per door).

WARNING!

Use both hands to remove the door frames. The door
frames will fold and could cause injury if both hands
are not used.

2. Place one hand on the upper rear and one hand on the

front of the door frame.

3. Pull the frame toward you with your rearward hand to

remove the frame from the vehicle.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

219

Summary of Contents for 2016 Wrangler

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2016 Wrangler, Owner'S Manual

Search results

Summary of Contents for 2016 Wrangler

Reviews:

Brands by name

Popular brands