Jeep 2013 Grand Cherokee, Operating Information Manual

Page: 82 / 408

Phone Call Features
The following features can be accessed through
the Uconnect® Phone if the feature(s) are avail-
able on your mobile service plan. For example,
if your mobile service plan provides three-way
calling, this feature can be accessed through
the Uconnect® Phone. Check with your mobile
service provider for the features that you have.
Answer Or Reject An Incoming Call — No
Call Currently In Progress
When you receive a call on your mobile phone,
the Uconnect® Phone will interrupt the vehicle
audio system, if on, and will ask if you would like
to answer the call. Press the
button to ac-
cept the call. To reject the call, press and hold
the
button until you hear a single beep,
indicating that the incoming call was rejected.
Answer Or Reject An Incoming Call — Call
Currently In Progress
If a call is currently in progress and you have
another incoming call, you will hear the same
network tones for call waiting that you normally
hear when using your mobile phone. Press the
button to place the current call on hold and
answer the incoming call.
NOTE:
The Uconnect® Phone compatible phones
in the market today do not support rejecting
an incoming call when another call is in
progress. Therefore, the user can only an-
swer an incoming call or ignore it.
Making A Second Call While Current Call In
Progress
To make a second call while you are currently
on a call, press the
button and say “Dial” or
“Call” followed by the phone number or phone-
book entry you wish to call. The first call will be
on hold while the second call is in progress. To
go back to the first call, refer to “Toggling
Between Calls”. To combine two calls, refer to
“Conference Call”.
Place/Retrieve A Call From Hold
To put a call on hold, press the
button until
you hear a single beep. This indicates that the
call is on hold. To bring the call back from hold,
press and hold the
button until you hear a
single beep.
Toggling Between Calls
If two calls are in progress (one active and one
on hold), press the
button until you hear a
single beep, indicating that the active and hold
status of the two calls have switched. Only one
call can be placed on hold at one time.
Conference Call
When two calls are in progress (one active and
one on hold), press and hold the
button until
you hear a double beep indicating that the two
calls have been joined into one conference call.
Three-Way Calling
To initiate three-way calling, press the
but-
ton while a call is in progress, and make a
second phone call, as described under “Making
a Second Call While Current Call in Progress”.
After the second call has established, press and
hold the
button until you hear a double beep,
indicating that the two calls have been joined
into one conference call.
78