Jeep 2013 Grand Cherokee, Operating Information Manual, Page: 208 / 408

2. Channel 1 Shared Status – When the icon is
displayed, the audio for Channel 1 is also
shared with the radio and playing through the
cabin speakers.
3. Channel 1 Audio Only/Mute - Audio: The
audio only icon is not used on Channel 1, in a
single screen system. Mute: when the Mute
icon is displayed, the audio for Channel 1 has
been muted using the remote control’s MUTE
button.
4. Channel 2 Mode – Displays the current
source for Channel 2.
5. Channel 2 Shared Status – When the icon is
displayed, the audio for Channel 2 is also
shared with the radio and playing through the
cabin speakers.
6. Channel 2 Audio Only/Mute – Audio: Only in
a single screen system: The audio only icon is
displayed on Channel 2 when Channel 1 is in a
video mode. Mute: when the Mute icon is dis-
played, the audio for Channel 2 has been muted
using the remote control’s MUTE button.
7. Channel 1 ENTER Button Action – When the
ENTER button on the remote control is pressed
with the
" INPUT FILE # " button visible on the
screen, the screen shows a numeric entry key-
pad which allows you to enter a specific track
number on data discs and HDD (see Numeric
Keypad Menu section of this manual). Also,
Enter Button Action – “INPUT TRK #” to enter a
specific track number on audio discs.
8. Channel 2 ENTER Button Action – When the
ENTER button on the remote control is pressed
with the
" DIRECT TUNE " button visible on the
screen, the screen shows a numeric entry key-
pad which allows you to enter a specific tuner
frequency, or tuner channel for AM/FM/MW/LW
(see Numeric Keypad Menu section).
9. Clock – Displays the time.
10. Video Lock – When the icon is displayed,
the remote control functions are disabled.
11. Not Available / Error – Operational or status
errors are displayed here.
12. Disc Changer Status – When the source for
either Channel 1 or Channel 2 is a multi-disc
changer, the disc loaded / selected status is dis-
played.
Mode Selection Menu
The first press of the MODE button causes the
Mode Selection menu to appear on screen. The
current mode is always the default selection.
The mode can be changed for either Channel/
Screen 1 or Channel/Screen 2 using the remote
control.
Use the remote control’s navigation buttons (
䉱
,
䉲
,
䉴
,
䉳
) to navigate through the available
modes, and then press the remote control’s
ENTER button to select the mode. An alternate
method of changing modes is repeated press-
Mode Selection Menu
204