manualshive.com logo in svg

Jeep 2009 Liberty, Owner'S Manual

The Jeep 2009 Liberty Owner's Manual is a comprehensive guide that provides detailed instructions and essential information about the vehicle. Easily download this manual for free from our website, ensuring you have all the necessary knowledge to make the most of your Jeep 2009 Liberty experience.

Share
Download
background image

ADDING FUEL

Fuel Filler Cap (Gas Cap)

The gas cap is located behind the fuel filler door on the
left side of the vehicle. If the gas cap is lost or damaged,
be sure the replacement cap is designed for use with this
vehicle.

CAUTION!

•

Damage to the fuel system or emission control
system could result from using an improper fuel
tank filler tube cap (gas cap).

•

A poorly fitting gas cap could let impurities into
the fuel system.

•

A poorly fitting gas cap may cause the Malfunc-
tion Indicator Light (MIL) to turn on.

•

To avoid fuel spillage and overfilling, do not “top
off” the fuel tank after filling. When the fuel
nozzle “clicks” or shuts off, the fuel tank is full.

WARNING!

•

Never have any smoking materials lit in or near
the vehicle when the gas cap is removed or the
tank filled.

(Continued)

Fuel Filler Cap

370

STARTING AND OPERATING

Summary of Contents for 2009 Liberty



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Liberty

Accel 2020 Installation Instructions preview
2020
Brand: Accel Pages: 2
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
KAP AUDI 4G HIGHEND Manual preview
AUDI 4G HIGHEND
Brand: KAP Pages: 20
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Oldsmobile 2004 Alero Quick Manual preview
2004 Alero
Brand: Oldsmobile Pages: 2
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
Subaru 1998 Forester Owner'S Manual preview
1998 Forester
Brand: Subaru Pages: 298
Jaeger 21360508 Fitting Instructions Manual preview
21360508
Brand: Jaeger Pages: 13
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Kia RIO 2005 General Information Manual preview
RIO 2005
Brand: Kia Pages: 25
Chevrolet CORVETTE 2020 Owner'S Manual preview
CORVETTE 2020
Brand: Chevrolet Pages: 324
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
Purpleline Nemesis Ultra FNU200 User Manual preview
Nemesis Ultra FNU200
Brand: Purpleline Pages: 4

Brands by name

Popular brands

Load more brands