Jeep 2006 Grand Cherokee Owner'S Manual Download Page 46 | Manualshive

Page: 46 / 448

Jeep 2006 Grand Cherokee Owner'S Manual Download Page 46

Airbag System Components

The airbag system consists of the following:

•

Occupant Restraint Control Module

•

Airbag Warning Light

•

Driver Airbag

•

Passenger Airbag

•

Side Curtain Airbags above Side Windows (If
Equipped)

•

Side Remote Acceleration Sensors (If Equipped)

•

Steering Wheel and Column

•

Instrument Panel

•

Interconnecting Wiring

•

Knee Impact Bolsters

•

Front Acceleration Sensors

•

Driver and Front Passenger Seat Belt Pretensioner

•

Occupant Classification System (OCS) — Front Pas-
senger Seat Only

− Occupant Classification Module

− Passenger Airbag Disable (PAD) Indicator Light

− Weight Sensors

How The Airbag System Works

•

The

Occupant Restraint Control (ORC) Module

de-

termines if a frontal, side, or rollover collision is severe
enough to require the front and/or side airbags to
inflate. The front airbag inflators are designed to
provide different rates of airbag inflation from direc-
tion provided by the ORC. The ORC may also modify
the rate of inflation based on the occupant size pro-
vided by the Occupant Classification Module. The
ORC will detect roll overs, not rear impacts.

46

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
44
45
46
47
48
...
»

Summary of Contents for 2006 Grand Cherokee

































































































































































































































































































































































































































































Reviews:

No comments