manualshive.com logo in svg

Jeep 2006 Grand Cherokee, Owner'S Manual, Page: 279 / 448

Share
Download
Jeep 2006 Grand Cherokee Owner'S Manual Download Page 279

TIRE SAFETY INFORMATION

Tire Markings

NOTE:

•

P (Passenger)-Metric tire sizing is based on U.S. design
standards. P-Metric tires have the letter “P” molded
into the sidewall preceding the size designation. Ex-
ample: P215/65R15 95H.

•

European Metric tire sizing is based on European
design standards. Tires designed to this standard have
the tire size molded into the sidewall beginning with
the section width. The letter

⬙

P

⬙

is absent from this tire

size designation. Example: 215/65R15 96H

•

LT (Light Truck)-Metric tire sizing is based on U.S.
design standards. The size designation for LT-Metric
tires is the same as for P-Metric tires except for the
letters “LT” that are molded into the sidewall preced-
ing the size designation. Example: LT235/85R16.

•

Temporary Spare tires are high pressure compact
spares designed for temporary emergency use only.
Tires designed to this standard have the letter “T”
molded into the sidewall preceding the size designa-
tion. Example: T145/80D18 103M.

•

High Flotation tire sizing is based on U.S. design
standards and begins with the tire diameter molded
into the sidewall. Example: 31x10.5 R15 LT.

STARTING AND OPERATING

279

5

Summary of Contents for 2006 Grand Cherokee

































































































































































































































































































































































































































































Reviews:

No comments