manualshive.com logo in svg

Jeep 2006 Grand Cherokee, Owner'S Manual, Page: 112 / 448

Share
Download
Jeep 2006 Grand Cherokee Owner'S Manual Download Page 112

NOTE: Do not fold the rear seat down with the center
seat belt buckled.

2. Fold the rear seat completely forward.

NOTE:

The automatic folding rear head restraints will

lower as the seat is folded down.

To Raise Rear Seat

Raise the rear seatback and lock it into place. If interfer-
ence from the cargo area prevents the seatback from fully
locking, you will have difficulty returning the seat to its
proper position. The automatic folding rear head re-
straints must be manually returned from the folded
position to the raised seating position.

WARNING!

The cargo area in the rear of the vehicle (with the
rear seatbacks in the locked-up or folded down
position) should not be used as a play area by
children when the vehicle is in motion. They could
be seriously injured in an accident. Children should
be seated and using the proper restraint system.

Folding Rear Seat

112

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2006 Grand Cherokee

































































































































































































































































































































































































































































Reviews:

No comments