Jeep 2006 Grand Cherokee Owner'S Manual Download Page 216

Page: 216 / 448

Operating Instructions - Satellite Radio Mode (If
Equipped)

Refer to the Satellite Radio section of the Owner’s
Manual.

Operating Instructions - Video Entertainment
System (VES

威

) (If Equipped)

Refer to separate Video Entertainment System (VES

威

)

Guide.

SALES CODE REF — AM/FM/CD (SINGLE DISC)
RADIO WITH OPTIONAL SATELLITE RADIO AND
HANDS FREE PHONE CAPABILITY

NOTE:

The radio sales code is located on the lower right

side of your radio faceplate.

Operating Instructions - Radio Mode

NOTE:

The ignition switch must be in the ON or ACC

position to operate the radio.

REF Radio

216

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2006 Grand Cherokee

































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Grand Cherokee

Reviews:

Jeep 2006 Grand Cherokee, Owner'S Manual, Page: 216 / 448

Search results

Summary of Contents for 2006 Grand Cherokee

Reviews: