Features
Direct drive Jebao/Jecod DCT/DCS/DCP-series pumps, CP series
cross-flow pumps and compatible 3 phases pump/wave makers
High performance fast response with sinusoidal current drive,
offer minimized rotor vibration and extra quiet operation
Pump Selection : Up to 32 preset pump parameters
Control Input : On-board RJ45 socket, using one analog channel
can control rotational speed, two analog channel can control
clockwise and counter-clockwise direction
Continuous firmware upgrade to support new pumps, please
contact your sales for arrangement
Specification
DC IN : 12 – 24VDC adapter or Pump Extender, current up to 4A
CONTROL VOLTAGE: 0 – 10VDC, 2 channels via RJ45 8P
connection
PUMP OUTPUT : 24V 3 phases BLDC pump and wave maker
Size and
weight : Typical 10cm x 10cm x 2.7cm (W*L*H), 150g
Packing List
AQLink A1 main unit
Quick Start Guide (this document)
Precaution – Controller Installation
Please install the controller
AWAY from wet, high
humidity and hot environment
, excessive humidity and
high temperature operating environment may
DEMAGE THE CONTROLLER PERMANENTLY
Please install in an environment with good ventilation.
This
is to allow the internal electronics working at desired
temperature and operating environment, or else product
durability will be affected. Active ventilation is required
when operating temperature is high
