17
Record Mode Setting
NTSC PAL
When using in different countries, choose the TV system according to local standard. The
image will be flickeringly if the TV system is set incorrectly.
External MIC VOL Setting
The volume of external MIC or audio equipment can be set, and there are 7 grades that
can be selected. It will be stereo when it is used with the external MIC.
Internal MIC VOL Setting
The volume of internal MIC can be set and there are 7 grades to be selected, there will be
stereo when it is used with the external MIC, defaults to right channel.
Record Overwrite Setting
When set as the RECORD OVERWRITE mode, the video will default to 5 minute per file.
When the card is full it will start overwriting the earliest recorded files.
Motion Detection Setting
Setting as below:
NO: No start MOTION DETECTION function
1 MIN: Start MOTION DETECTION function, it will delay 1 minute to stop recording after
the object leaves the shooting range.
3 MINS: Start MOTION DETECTION function, it will delay 3 minutes to stop recording after
the object leaves the shooting range.
5 MINS: Start MOTION DETECTION function, it will delay 5 minutes to stop recording after
the object leaves the shooting range.
When set in the MOTION DETECTION mode, the camera will automatically start recording
when it detects any kind of movement in its filming range. When the motion stops, the
camera will automatically stop recording again.
Time Stamp Setting
OFF: No time stamp
DATE: DATE only
TIME: TIME only
DATE/TIME: both DATE/TIME
With this setting, the current time will be stamped on the video and the recording time
can be seen during playback.
SYSTEM SETTINGS
