29
5.
Cut and remove the strings or net.
6.
If the bale is of small diameter, and located against a wall, partition or stack, climb
into the cab and reverse the tractor so that the door slides under the bale. Cut and
remove all the string or net using a knife and protective gloves.
7.
From the tractor cab close the door to roll the bale into the hopper.
B) With door + 500 mm short door extension
The short extension option facilitates the loading of large straw bales, up to a maximum of
1.80 metres diameter.
C) With door + 1 metre long door extension
The long door extension is mainly intended for use with large square “BIG BALES”.
- From the tractor cab close the door to roll the bale into the hopper.
2. MULCHING
Ensure that under no circumstances during operation does anyone enter the potential danger
areas around the blower unit or the trajectory of the mulching chute.
I) Round straw bales
1.
With the straw blower lowered onto the ground, tractor engine stopped, dismount
from the tractor cab.
2.
On the turbine gearbox, while stationary, select the mulching speed of 540 rpm, high
gear. See sticker near the PTO.
3.
Re-enter the cab.
4.
Do not put the bale hard against the shredder; leave adequate space by slightly
opening the door.
5.
Turn the spray chute in the desired direction for mulching and raise it to maximum
height.
