18
Before any servicing or repair:
5.
Check the stability of the unit and its components.
6.
Lower the unit to the ground.
7.
Fit any stability devices provided (stand etc).
8.
Check that all moving parts are stopped.
9.
Declutch the tractor PTO.
10.
Disconnect the hydraulic hoses between the tractor and the unit.
11.
Stop the engine and remove the starter key; disconnect the battery (or the electrical
supply).
12.
Apply the hand brake.
13.
Select the equipment gear ratio selector to neutral.
14.
Allow any component likely to be at a high temperature to cool.
6. b / Welding operations:
1.
When carrying out any welding operation on the equipment, disconnect the electrical
supply and the tractor battery.
2.
Disconnect and protect any hoses (particularly rubber) and any electrical cables to
ensure that they are not damaged by incandescent particles that could cause fluid loss
or a short circuit.
6. c / Work on tyres:
1.
Only carry out work on tyres if you have the necessary special tools and experience.
2.
Incorrect fitting could seriously compromise your safety.
3.
If in doubt, call in qualified personnel.
4.
Do not fit tyres of different characteristics from those recommended by the
manufacturer.
5.
Ensure that the tyres are inflated to the pressures recommended by the tyre
manufacturer (see sticker page 16).
6. d / Electrical servicing:
Before carrying out any work on the electrical system, disconnect the electrical supply.
