background image

 

3

General Information and Specifications 

General Information 

This user’s manual for the SK Series Fiberoptic Switch Module contains complete operating 
instructions.  
 
The SK Series Fiberoptic Switch Module (Figure 1) is a modular 1xN controllable switch. The 
switch is microprocessor-controlled via a 26-pin parallel interface. It connects a single fiberoptic 
channel to any of N (up to 26) channels. Small and rugged, the SK Series switch module is 
designed to be used in embedded applications and is available in both single-mode and 
multimode versions.  
 

 

Figure 1: SK Series Fiberoptic Switch 

 
The operation of the switch is based on JDS Uniphase’s proven expanded beam lens 
technology using a precision stepper motor to align optical channels. The standard single-pole 
configuration consists of a single common port that can be aligned to any one of 26 ports. In 
electrical terms, the SK switch is a single-pole, 26-throw switch. The switching mechanism 
implements collimating lenses that eliminate problems associated with modal noise and provide 
low insertion loss and high repeatability. The use of collimating lenses minimizes insertion loss 
and enhances stability and repeatability. The design is optimized for high return loss. 

Single-Common (SK-C) Switch Configuration 

Figure 2 shows the single-common C configuration of the switch. 
 

 

Figure 2: SK-C Switch Configuration 

 

 

Summary of Contents for SK Series




























Reviews: