JDS Uniphase RX3 Series, User Manual

Page: 46 / 55

33
Table 11: GPIB Standard Commands
Command Operation
REMOTE ENABLE Lockout keypad.
RETURN TO LOCAL Enable keypad.
INTERFACE CLEAR Resets the interface to the default setting.
ENTER Read measurement.
OUTPUT Write a device-dependent command.
SPOLL Serial poll.
Status Codes of the Serial Poll Register
The status codes of the serial poll register are listed in Table 12.
Table 12: Status Codes of the Serial Poll Register
Code Meaning
0 RX3 meter is ready to receive commands.
1 RX3 meter is busy executing commands.
3 RX3 meter is trying to send commands.
GPIB Device-Dependent Commands
The GPIB device-dependent commands are listed in Table 13.
Table 13: GPIB Device-Dependent Commands
Command Operation
A01E Select LED source for Power mode.
A02E Select laser source for Power mode.
A03E Turn averaging function on.
A04E Turn averaging function off.
A05E Switch to Relative Power mode.
A06E Switch Absolute Power mode.
A07E Switch source
1
.
A08E Switch to Backreflection mode.
(table continued)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com