JDS Uniphase RX3 Series, User Manual

Page: 45 / 55

32
Table 10: GPIB Functions
Mnemonic Function Name
SH1 Source handshake, complete capability.
AH1 Acceptor handshake, complete capability.
T6 Basic talker, serial poll, unaddressed if MLA.
L4 Basic listener, unaddressed if MTA.
SR0 No service request capability.
RL2 Remote/local, complete capability.
PP0 Parallel poll, no capability.
DC0 Device clear, no capability.
DT0 Device trigger, no capability.
C0 Controller, no capability.
E1 Electrical interface, open collector drivers.
Setting the GPIB Interface Address
To set the GPIB address:
1. Press the MENU key.
2. Press the soft key labeled REMOTE MENU.
3. Press the soft key labeled EMULATION: RX3 emulation, or press the key again to select
RX1000 emulation.
4. Press the soft key labeled INTERFACE: to set the interface to GPIB. The GPIB address is
displayed.
5. Press
the or key to set the interface to the required address.
6. Press the BR or POWER key to exit Menu mode.
GPIB Standard Commands
The GPIB standard commands are listed in Table 11.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com